Tank Abandonment in Place in Idaho, Idaho

When tank removal isn't feasible due to location constraints, abandonment in place may be an option. This involves properly closing the tank by filling it with foam or concrete slurry. In Idaho, Idaho, this must be done by licensed contractors following Idaho Department of Environmental Quality (DEQ) guidelines.

Average Cost
$1,500-3,000
Permit Cost
$50-150
Timeframe
1 day
Contractors Listed
0+

About Tank Abandonment in Place in Idaho

Tank abandonment in place is an alternative to removal when the tank is located under a building, driveway, or other structure that makes excavation impractical or prohibitively expensive. The tank is cleaned, filled with inert material, and properly closed. Note: Not all municipalities in Idaho allow abandonment in place, and many buyers prefer removal.

Moderate use in rural areas and older homes before propane became dominant.

When You Need Tank Abandonment in Place

  • Tank located under building addition or porch
  • Tank under driveway or patio that can't be removed
  • Excavation would damage critical structures
  • Cost of removal exceeds property value improvement
  • Temporary solution while planning future removal

The Abandonment Process in Idaho

  1. 1Verify abandonment in place is allowed by local jurisdiction
  2. 2Obtain necessary permits
  3. 3Drain all remaining oil from tank
  4. 4Clean tank interior to remove sludge
  5. 5Cut holes in tank to allow filling
  6. 6Fill tank with concrete slurry, sand, or foam
  7. 7Cap all pipes and openings
  8. 8Document abandonment with photos and records
  9. 9File closure paperwork with Idaho Department of Environmental Quality (DEQ)

Idaho Regulations

Regulatory Body: Idaho Department of Environmental Quality (DEQ)

Permit Required: Yes

Permit Cost: $50-150

Notable Requirements: DEQ oversees UST program. Aquifer protection is priority due to Snake River Plain Aquifer.

Tank Abandonment in Place FAQs for Idaho

Is tank abandonment in place legal in Idaho?

Tank abandonment in place is allowed in Idaho under certain circumstances, but regulations vary by municipality. Some areas require removal regardless of location. Check with Idaho Department of Environmental Quality (DEQ) and your local building department.

Will buyers accept a tank abandoned in place?

Many buyers and lenders prefer complete removal. Abandoned tanks may still affect property value and future sale. In Idaho, real estate agents typically recommend removal when possible.

What's the difference between abandonment materials?

Concrete slurry is most permanent but heaviest. Foam fill is lighter and easier to remove later if needed. Sand fill is cheapest but may shift over time. Most Idaho contractors recommend foam or concrete.

Can an abandoned tank leak later?

Properly abandoned tanks shouldn't leak because all oil is removed and the tank is filled solid. However, if not done correctly, residual oil or rust can still contaminate soil over time.

Find Idaho Contractors

Get free quotes from licensed abandonment professionals in your area.

Browse ID Contractors

Other Services in Idaho